Yes, the music equipment scene is changing, but vintage vinyl turntables remain relevant. And, if you’ve had an old record player lying in the house, you can make it start working again. With a few repairs, you could be listening to warmer, more authentic sound from your turntable.
Here are five repair tips to help you make your vinyl vintage turntable function as it did during the good old days.
Start By Cleaning the Player
If you’ve not used your turntable for a while, it must have gathered some dust. Thus, before you even try to plug it into a power source, make sure that it is clean. Wipe away the dust, oils or any other substances that may have accumulated on the player for the time it was not in use. That way, you can easily tell if it has any worn out parts that require replacement.
Replace the Needle
One of the most common faults of vinyl vintage turntables is a broken needle. You must replace the needle if you’re going to use the machine in the first place. Be sure to look for a replacement in your local classic music equipment dealer. Also, use a magnifying glass to help you install the needle correctly on the player. You may consider seeking the services of a technician as well.
Note – a slanting needle could damage your vinyl records and affect the quality of sound.
Check the Cords
Due to the fact have you have not used the turntable for a while, it may have broken circuits or snapped wires. Make sure that you check all the wires one by one to identify what needs replacement. Besides, dealing with this problem will save time that you could have otherwise spent troubleshooting. It will also help you know the repairs you have to carry out on the player before you can start using it.
Check the Belt
Many vinyl vintage turntables use a belt system. If the belt is worn out, off track or broken, it means that the machine will not work or will rotate unevenly. Replace the belt if need be or patch it to ensure that your unit plays without any hitches.
Have Some Soldering Wires
Be ready to solder. Buy a few soldering wires and the parts that require replacement. Again, if you don’t have the knowledge, you may take the turntable to a repair shop or call the manufacturer to see if you can make some arrangement. If you decide to fix the machine, don’t forget to ground yourself to reduce the risk of injury when working with electrical wires.
It is important to know vintage record players are different. When scouting for parts, use the model number to make sure that you spend your money on the correct item. Be sure to visit Vinyl Vintage, a site that’s dedicated to help you get replacement parts for your turntable. And when you find what you’re looking for, you will be on your way to listening to some good classical music.